Arris CORWave II MultiWavelength


Allows for use of up to16 full-spectrum ITU wavelengths in the 1550 nm range with 65 km reach (further in an all-digital environment) conserving fiber and providing flexibility for consolidation or elimination of OTNs and node splitting i distant locations.
Supports in headend addition of narrowcast tiers in both analog and digital environments, decreasing system complexity and stranded capital.
Externally modulated transmitters do not require dispersion compensation in redundant architectures and can support repeated amplifications and long links.
Available in:

16 dBm variable output

  • Rear fiber
  • Extended linearized version

10 dBm fixed output

  • Rear fiber
  • Extended linearized version

Business and residential services can be run over as few as one fiber with no service interruptions caused by optical impairments.

CORView Element Management System.

In an environment where service and capacity strongly influence success, the ability to quickly – and with minimal disruptions – add capacity to existing networks provides operators with a significant competitive advantage.

Increase Revenue Faster, Reduce CAPEX

The CHP CORWave II 1 GHz C-Band Multi Wavelength Forward Transmitter in the CHP form factor effectively saves cable cable operators capital that would otherwise be spent on new fiber runs by the ability to multiplex up to 16 ITU full-spectrum wavelengths in the 1550 nm range over as few as one fiber. The CORWave II ITU multi wavelength plan allows new revenue generating business services to be run alongside residential services if desired. 65 km reach, and beyond in an all–digital environment, provides the flexibility to consolidate or eliminate OTN sites and to split nodes in distant locations for success-based expansion.

Reduce Complexity

The CHP CORWave II supports full-spectrum broadcast and narrowcast capability at 54 – 1002 MHz, with BC/NC signal combining done in the environmentally controlled headend or hub. This allows narrowcast tiers to be easily added in an analog environment, and protects investment during the migration to all-digital without stranded capital.

Add Value to Existingg Assets

A large installed base of the CHP Max5000® Converged Headend Platform allows cable operators to add value to their headends with the addition of the CHP CORWave II for new, revenue generating services and reduced complexity. The CHP CORWave II is rapidly deployable, robust, and scalable, complementing all CHP Max5000 application modules and components, and adding capacity at a cost effective price point. The CHP CORWave II can be monitored by the COORView element management system, which provides an intuitive and user-friendly interface for security, discovery, configuration, and inventory functions.

do pobrania

Wavelength  1525 to 1565 nm, 16 optimized wavelengths
Output Power 9.5 dBm(fixed), 15‐17 dBm(variable), typical
Operating Bandwidth 45 to 1006 MHz
Channel loading 79 analog channels plus 75 QAM channels (6 dB below analog) 30 analog channels plus 125 QAM channels (6 dB below analog) 155 QAM channels, 6‐MHz QAM channel
Input RF Power 14 dBmVfor 79 analog channels with 75 QAM channels @ –6 dB 16 dBmVfor 30 analog carriers with 125 QAM channels @ –6 dB 12 dBmVfor 155 QAM 
RF Input Impedance 75 Ω
Flatness ±1.0  dB
Test Point –20 ±1.0  dB
Typical Link Performance
CCNR 50 dB for 79 analog channels, 75 QAM channels (6 dB below analog) 1,2 50 dB for 30 analog channels, 125 QAM channels (6 dB below analog) 2,3
MER 38 dB (for all three cases) 1,4
BER 1E‐8 (Annex B test) (for all three cases)
CSO –58 dBcfor 79 analog channels, 75 QAM channels (6 dB below analog) 1,2 –60 dBcfor 30 analog channels, 125 QAM channels (6 dB below analog) 2,3
CTB –58 dBcfor 79 analog channels, 75 QAM channels (6 dB below analog) 1,2 –60 dBcfor 30 analog channels, 125 QAM channels (6 dB below analog) 2,3
SBS Suppression  11 dBm(fixed), 13 dBm(variable)5
Power Consumption 27 W typical (16 dBm), 18 W typical (10 dBm)
Optical Connector SC/APC
RF Connector F‐type
Control Interface CORViewEnterprise Element Manager Software or CORViewLite Element Manager Software
Dimensions, W x H x D, in (cm) 1.25 x 3.4 x 18.5 (3.2 x 8.7 x 47.0)
Weight, lbs (kg) 2.75 (1.24)
Operating Temperature Range 32°to 122°F (0°to 50°C)
Storage Temperature Rang –4°to 140°F (–20°to 60°C)
Humidity 85%, noncondensing, max.



Usługi utrzymania systemów


Zapytaj o
Arris CORWave II MultiWavelength